+86-0523-18921730790
Modèle: Custom
marque: OEM
Lieu D'origine: Chine
Statut: Nouveau
Inspection D'usine Vidéo: Fourni
Rapport D'essai Mécanique: Fourni
Type De Marketing: Produit ordinaire
Période De Garantie Des Composants De Base: 3 mois
Composants Principaux: PLC, Moteur, Moteur
Période De Garantie: 3 mois
Service Hors Garantie: Support technique vidéo, Pas de service, Des pièces de rechange
Où Fournir Des Services Locaux (dans Quels Pays Existe-t-il Des Points De Service à L'étranger): rien
Industrie Applicable: Usine de fabrication, autre
Emplacement De La Salle D'exposition (dans Quels Pays Existe-t-il Des Salles D'échantillons à L'étranger): rien
Place Of Origin: Jiangsu, China
Surface Treatment: Coated
Alloy Or Not: Is Alloy
Brand Name: Metalli
Grade: 3000 Series
Surface: Mill Finish
Packing: Best Suitable Packing Way
Temper: O-H112
Type: Plate, Plate
Application: Heat Exchanger Material And Industrial Fields
Thickness: 0.05 To 4 Mm, 0.05 To 4 Mm
Width: 450 To 1300 Mm, 450 To 1300 Mm
Model Number: Aasp 1005
Length: 500 To 6000 Mm
Alloy No: 3003
Standard: Gb/T3880.1-2006
Certification: Iso9001:2008 Sgs
Max Weight Per Package: 2 Tons
Détails d'emballage: Notre emballage standard d'exportation: mousse PE + sac en plastique + boîte en carton + palette; Mousse PE + sac en plastique + boîte en bois.
productivité: 50000 per month
transport: Ocean,Land,Air,BY Express
Lieu d'origine: Jiangsu, Chine
Soutenir: 50000 per month
Certificats : International Automotive Task Force
Hafen: ShangHai.China
Type de paiement: L/C,T/T,PaypalL/C,T/T
Incoterm: FOBFOB
Meilleure vente de matériau de brasage feuille d'aluminium 3003 h14
Feuille d'aluminium 3003 H14
tôle d'aluminium
plaque de feuille
| 1. Aluminum alloy number | ||||||||||||||
| No. | Aluminum Alloy Number | |||||||||||||
| 1.1 | 3003 | |||||||||||||
| 2. Product size and tolerance | ||||||||||||||
| No. | Specification | Size | Tolerance | |||||||||||
| 2.1 | Length (mm) | 500-6000 | ±2 | |||||||||||
| 2.2 | Width (mm) | 450-1300 | ±1 | |||||||||||
| 2.3 | Thickness (mm) | 0.05-4 | min ±0.005,max ±0.08 | |||||||||||
| 3. Chemical composition for some typical alloys | ||||||||||||||
| No. |
Internal Alloy Number |
AA number | Chemical Composition (%) | |||||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Zr | Bi | Others | Al | ||||
| Each | Total | |||||||||||||
| 3.1 | 1060 | 1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | 99.6 | |||
| 3.2 | 1070 | 1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | 0.04 | 0.03 | 0.03 | 99.7 | |||
| 3.3 | 1100 | 1100 | 0.95 | 0.05-0.2 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||||
| 3.4 | 3003 | 3003 | 0.6 | 0.7 | 0.05-0.2 | 1-1.5 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.5 | 3005 | 3005 | 0.6 | 0.7 | 0.3 | 1.0-1.5 | 0.2-0.6 | 0.25 | Cr 0.1 | 0.05 | 0.15 | RE | ||
| 3.6 | 4004 | 4004 | 9.0-10.5 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.7 | 4045 | 4045 | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.8 | 4047 | 4047 | 11.0-13.0 | 0.8 | 0.3 | 0.15 | 0.05 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.9 | 4104 | 4104 | 9.0-10.5 | 0.8 | 0.25 | 0.1 | 1.0-2.0 | 0.2 | 0.05-0.2 | 0.05 | 0.15 | RE | ||
| 3.10 | 4343 | 4343 | 6.8-8.2 | 0.8 | 0.25 | 0.1 | 0.05 | 0.2 | 0.05 | 0.15 | RE | |||
| 3.11 | 4343A | 4343A | 6.8-8.2 | 0.6 | 0.1 | 0.1 | 0.02 | 0.1 | 0.05 | 0.15 | RE | |||
| 3.12 | 6060 | 6060 | 0.3-0.6 | 0.1-0.3 | 0.1 | 0.1 | 0.35-0.6 | 0.15 | 0.1 | Cr 0.05 | 0.05 | 0.15 | RE | |
| 3.13 | 6061 | 6061 | 0.4-0.8 | 0.7 | 0.15-0.4 | 0.15 | 0.8-1.2 | 0.25 | 0.15 | Cr 0.04-0.35 | 0.05 | 0.5 | RE | |
| 3.14 | 6063 | 6063 | 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | Cr 0.1 | 0.05 | 0.15 | RE | |
| 3.15 | 6A02 | 6A02 | 0.5-1.2 | 0.5 | 0.2-0.6 | 0.1-0.35 | 0.45-0.9 | 0.2 | 0.15 | 0.05 | 0.15 | RE | ||
| 3.16 | 7072 | 7072 | 0.7 | 0.1 | 0.1 | 0.1 | 0.1 | 0.8-1.3 | 0.05 | 0.15 | RE | |||
| 3.17 | 8011 | 8011 | 0.5-0.9 | 0.6-1.0 | 0.1 | 0.2 | 0.05 | 0.1 | 0.08 | Cr 0.05 | 0.05 | 0.15 | RE | |
| 3.18 | 4343+1%Zn | 4343+1%Zn | 9.0-11.0 | 0.8 | 0.25 | 0.1 | 0.05 | 0.7-1.3 | 0.05 | 0.15 | RE | |||
| 3.19 | 4045+1%Zn | 4045+1%Zn | 9.0-11.0 | 0.8 | 0.3 | 0.05 | 0.05 | 1.7-1.3 | 0.05 | 0.15 | RE | |||
| 3.20 | 4A13 | 4343Mod | 8.9 | 0.6 | 0.2 | 0.1 | 0.08-0.2 | 0.2 | 0.15 | 0.05 | 0.15 | RE | ||
| 4. Mechanical properties for some typical alloys | ||||||||||||||
| No. | Alloy number |
Thick. (mm) |
Temper |
Yield Strength Rp0.2(Mpa). Min |
Tensile Strength Rm (Mpa) |
Elongation (%) A50,Min |
Homogenization treatment | Typical usage | ||||||
| 4.1 | 3003 | 0.08-0.15 | O | 35 | 95-135 | 8 | N | Fins | ||||||
| 4.2 | 3003 | 0.16-0.35 | O | 35 | 95-135 | 10 | N | Fins | ||||||
| 4.3 | 3003 | 0.15-0.3 | H12 | 90 | 120-175 | 0.5 | N | Fins | ||||||
| 4.4 | 3003 | 0.06-0.08 | H14 | 125 | 145-185 | 0.5 | N | Fins | ||||||
| 4.5 | 3003 | 0.081-0.3 | H14 | 125 | 145-200 | 0.5 | N | Fins | ||||||
| 4.6 | 3003 | 0.06-0.16 | H16 | 160 | 165-205 | 0.5 | N | Fins | ||||||
| 4.7 | 3003 | 0.2-0.3 | H24 | 125 | 145-205 | 6 | N | Fins | ||||||
| 4.8 | 3003-1 | 0.35-3.0 | O | 35 | 95-135 | 20 | Y | Plate | ||||||
| 4.9 | 3003-1 | 0.40-3.0 | H14 | 125 | 145-185 | 3 | Y | Plate | ||||||
| 4.10 | 3003-1 | 1.0-3.0 | H24 | 125 | 145-185 | 10 | Y | Plate | ||||||
| 4.11 | 6A02 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.12 | 6060 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.13 | 6063 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.14 | 4343 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.15 | 4343 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.16 | 4045 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.17 | 4045 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.18 | 4104 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.19 | 4104 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.20 | 4A13 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.21 | 4A13 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.22 | 4047 | 0.07-3.0 | O | 35 | 95-150 | 8 | N | Sheet for brazing | ||||||
| 4.23 | 4047 | 0.07-3.0 | H14 | 120 | 140-200 | 0.5 | N | Sheet for brazing | ||||||
| 4.24 | 3003 | 0.25-0.35 | H24 | 130 | 155-205 | 6 | N | Fins for air cooler | ||||||
| 4.25 | 3003 | 0.1-0.2 | H14 | 125 | 145-185 | 1 | N | Fins | ||||||
| 4.26 | 3003 | 0.1-0.3 | O | 35 | 95-135 | 10 | N | Fins | ||||||
| 4.27 | 3003 | 0.3-0.8 | H14 | 125 | 145-185 | 2 | Y | Plate | ||||||
| 4.28 | 3003 | 0.8-2.5 | H14 | 125 | 145-185 | 4 | Y | Plate | ||||||
| 4.29 | 3003 | 0.5-1.6 | O | 35 | 145-185 | 20 | Y | Plate | ||||||
| 4.30 | 3003-1 | 0.3-1.8 | O | 35 | 95-135 | 20 | Y | Band | ||||||
| 4.31 | 3003-1 | 0.5-4.0 | O | 35 | 95-135 | 25 | Y | Plate | ||||||
| 4.32 | 3005 Mod | 0.25-0.6 | H24 | 150 | 185-235 | 8 | N | Long life tube | ||||||
| 4.33 | 6060 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.34 | 6063 | 0.8-4.5 | O | ≤85 | ≤150 | 20 | Y | Vacuum plate | ||||||
| 4.35 | 3005 | 0.8-4.5 | O | 40 | 80-120 | 20 | Y | Vacuum plate | ||||||
| 4.36 | 3005 | 0.6-4.5 | H22 | 110 | 145-195 | 15 | Y | Vacuum plate | ||||||
| 4.37 | 1100 | 0.2-0.3 | H24 | 90 | 115-155 | 3 | N | Fins for air cooler | ||||||
| 4.38 | 6A02 | 1.0-5.0 | O | ≤85 | ≤150 | 20 | Y/N | Plate | ||||||
| 5. Surface finish and other properties | ||||||||||||||
| No. | Item | Description | ||||||||||||
| 5.1 | Surface finish | a. The material shall bright finish; b. The material shall be from pinholes and tearing | ||||||||||||
| 5.2 | Diagonal Variation | The sheets shall not have any diagonal outs beyond 0.5mm | ||||||||||||
| 5.3 | Bend test | There shall be no sign of cracking or peeling off effect while longitudinal or transverse or close bends of 180 or angular. | ||||||||||||
| 6. Packing,Shipping and others | ||||||||||||||
| No. | Item | Description | ||||||||||||
| 6.1 | Packing | To be packed in wooden crate with polythene cover for water protection | ||||||||||||
| 6.2 | Marking | Each box to be legibly marked with the name of the manufacturer or supplier, the alloy designation of material,condition,dimensions and weight | ||||||||||||
| 6.3 | Shipping tools | Ship goods by van to departune port then by sea to desitination port | ||||||||||||
| 6.4 | Quantity variation |
±10% variation with order quantity shall be acceptable |
||||||||||||
Groupes de Produits : Extrusions de profilés en aluminium > Dissipateurs en profilé d'aluminium
Mousse PE+sac en plastique+boîte en carton+palette ;
Mousse PE + sac en plastique + boîte en bois.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now